How to Fix Damaged Memory RAM or Dead

How to Fix Damaged Memory Ram or Dead

  This time kia will discuss one of the components of a PC or a computer that is RAM Have you ever had your computer suddenly ngehang / crashes while working on the computer? Have you experienced a computer that suddenly emits a "beb" ato short length many times the first time you press the power Computer? At the time of booting windows computer suddenly you run into blank-screen or commonly called the BSOD? or your computer unexpectedly restarts itself frequently? In general, it is all the traits of ram memory problems.

Kingston Hyperx

   Your computer problems this time lies in the memory ram. There are many more signs caused by faulty memory ram said / shall replace with new, or because of the installation of memory ram that does not fit put on the stand. Keep on how to improve or maintain Memory RAM itself how to keep us comfortable in working with computers.

  Previously you had to know at least an explanation of what it is RAM, ROM, and also its function. Many ways in which to improve both memory ram or damaged components are said to have been damaged (not physically damaged / broken). Here I provide some lightweight way to do user / users computer without having to possess special skills.

Tips on How to fix Memory Ram:

The first way: 

Tools and materials:

• Avometer and of course memory ram that has been damaged in this case is considered dead. 

• A piece of fabric (Fabric anything)

• pencil eraser

If already available all new we do:

1. Uninstall / off memory ram of the holder slots
2. Rub pins ram memory legs yellow with a pencil eraser and then wipe with a cloth.
3. The goal for the pin door free of dust, and also will provoke ions on pin memory be simulated and so the conductor will be more active.
4. If it is, point avometer on Ohm (skla measuring resistance) free .posisinya 1k, 10k, 100k
5. Take the needle negative (-) avometer then put on a pin memory, free pin which wrote (one), then navigate / grit needle positive (+) on the sets foot Chipset / IC memory ram tersebut.Gesekkan to all feet existing IC legs on the memory.



Ram

6. Once this is done, you just plug it back into the slot dudukannya.NB: (mounting on the mounting slots of memory must be appropriate and fitting).

description:
   In this tip we harness the flow of electric current flowing from the battery to the circuit avometer chipset / memory ICs. The principle works the same as we do reset Cmos Mainboard the crash and did not want to live because of interruption of electric current trip.

The second way is rather extrims, and the risk of memory ram will Matot (death total):

Tools and materials

• You prepare Tiner B, (g have a lot of eucalyptus oil bottle only) .

• Prepare the HP Blower, if no you can use the dryer if you use a hair dryer rambut.Tp result will not be maximal.

• Kuas 

Ram

The trick:Uninstall / remove the memory ram of the stand

1. Water the ram memory components with Tiner-B and then clean with a brush until really looks clean.
2. Dry the ram memory using a blower or a hair dryer until it is completely dry of thinners.
3. After being dried, reattach his position as before.

Tweet

Subscribe to receive free email updates: